• E sebelisoa haholo ho Switch, li-automation tsa indasteri, mochini oa stepper, sesebelisoa, joalo-joalo.
• Universal AC input / Lethathamo le feletseng.
• Ho sebetsa hantle haholo
• Tšireletso.Potoloho e khuts'oane / Tlamelloa / Over voltage / Overload
• Teko ea 100% e tletseng mojaro oa ho chesa
• Guarantee ea lilemo tse 2
Mohlala No. | HSJ-60-12 | HSJ-60-24 | |
Sephetho | Motlakase oa DC | 12V | 24V |
Range ea Hona joale | 0~5A | 0~2.5A | |
Matla | 60W | ||
Ripple Le Lerata | Boholo ba 240mVp-p | ||
Voltage ADJ.Range | 10 ~ 13V | 22-26V | |
Mamello ea Voltage | ±5% | ||
Seta, Nako ea ho Phahamisa | 1500ms, 30ms / 230VAC | ||
Kenyeletso | Range ea Voltage | 90 ~ 260VAC | |
Maqhubu a Range | 50-60Hz | ||
Katleho | >0.85 | ||
PF | 0.6 | ||
Hona joale | 7A/110VAC, 4A/220VAC | ||
Surge Current | 40A/110VAC, 60A/220VAC | ||
Leakage Current | Boholo ba 3.5mA/240VAC | ||
Tshireletso | Keketseho | Ka holimo ho 110% -150% ea matla a lekantsoeng | |
Shut-down output voltage, auto recovery ka mor'a hore boemo ba phoso bo tlosoe | |||
Overvoltage | Ka holimo ho Max.Voltage (105% ea matla a lekantsoeng) | ||
Shut-down output voltage, auto recovery ka mor'a hore boemo ba phoso bo tlosoe | |||
Ho feta mocheso | 90℃ ± 5℃(5~12V) 80℃ ± 5℃(24V) | ||
Shut-down output voltage, auto recovery ka mor'a hore boemo ba phoso bo tlosoe | |||
Tikoloho | Mocheso o sebetsang.& mongobo | "-20°C~+60°C, 20%~90%RH | |
Mocheso oa polokelo.& mongobo | "-40°C~+85°C, 10%~95%RH | ||
Polokeho | Ho mamella Voltage | I/PO/P: 1.5KVAC/1min;I/PF/G: 1.5KVAC/1min;O/PF/G: 0.5KVAC/1min; | |
Polokeho | GB4943 ;IEC60950-1;EN60950-1 | ||
EMC | EN55032:2015/AC:2016;EN61000-3-2:2014;EN61000-3-3:2013;EN55024:2010+A1:2015 | ||
LVD | EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 | ||
Tse ding | Ho phodisa | Moea oa mahala | |
Bolele ba bophelo | 20000hrs | ||
Litekanyo (L*W*H) | 110*78*38mm | ||
Boima ba 'mele | 230g |
E, li-switches tsa rona tse ngata li tšehetsa PoE, tse u lumellang hore u sebelise lisebelisoa tse kang lik'hamera tsa IP kapa libaka tsa ho kena ka mohala ka ho toba ka thapo ea Ethernet, ho felisa tlhokahalo ea mohala o arohaneng oa matla.
Palo ea likou e fapana ho ea ka mohlala.Re fana ka li-switches tse nang le litlhophiso tse fapaneng tsa boema-kepe ho tloha ho likou tse 5 ho isa ho tse 48, ho netefatsa hore u ka khetha e lumellanang hantle le litlhoko tsa hau tsa marang-rang.
E, boholo ba li-switches tsa rona li na le bokhoni ba ho laola hole.Ka sehokelo sa marang-rang kapa software e inehetseng, o ka khona ho laola le ho hlophisa litlhophiso tsa switch, ho lekola tšebetso ea marang-rang, le ho etsa liapdeite tsa firmware ho tsoa kae kapa kae.
Li-switch tsa rona li etselitsoe ho lumellana le mefuta e fapaneng ea li-protocol tsa marang-rang tse kenyeletsang Ethernet, Fast Ethernet le Gigabit Ethernet.Li ka kopanngoa ka mokhoa o se nang moeli le lisebelisoa tse fapaneng le meralo ea marang-rang ntle le mathata leha e le afe a ho lumellana.